Aeroflo2 20 Site
20 Site Aeroponics System

The AeroFlo 2 20 site system is an excellent choice for growing small crops such as lettuce, cucumbers, peppers, basil, and other herbs. Varieties of flowers and tomatoes, which do not grow taller than three feet, will also do well. The AeroFlo 2 20 site system includes everything you need to get started, and will work beautifully when placed near a sunny window in your home or office.

The AeroFlo2 20 is sized 1'6" x 7'

This system includes:

8 gallon reservoir
2 - 6 ft. grow chambers
Mag Drive #3 pump
Injection manifold
support structure
3" Grow Cups
CocoTek Coco cups and Hydroton
3 part Flora Kit

AEROFLO2 30
30 Site Aeroponics System

With a 20-gallon reservoir and thirty plant sites, the AeroFlo 2 30 site system’s three grow chambers can be kept side-by-side or fanned out in a radial pattern to maximize growth on lower branches. The AeroFlo 2 30 site is perfect for those who want a smaller, high performance system, particularly well-suited to growing lettuce, basil, and other small plants up to three feet in height.

The AeroFlo2 30 is sized 2'6" x 7'

This system includes:
20 gallon reservoir
Three 6 ft. grow chambers
Bluestone pump
injection manifold
support structure
3" grow cups
CocoTek Coco cups and Hydroton
3 part Flora Kit

AEROFLO2 60
60 Site Aeroponics System

Our largest AeroFlo2 unit, the AeroFlo2 60, accommodates sixty plant sites. Growers who wish to expand this system can enjoy 120 plant sites with the addition of our AeroFlo2 60 Extension Unit. Users can choose to configure the grow chambers all on the same side or to stagger them to cover a larger area or to grow larger plants. The AeroFlo2 60 features a generous 40-gallon Panda reservoir.

The AeroFlo2 60 is sized as follows:
Standard configuration:
5'1" x 6'10"
Staggered configuration:
5'1" x 11'7"
Aero Flo 2 60 with Extension Unit:
9'7" x 6'10"

This system includes:
40-gallon Panda reservoir
Six 6 ft. grow chambers
TNC pump
Injection manifold
Support structure
3" Grow Cups
CocoTek Coco Cups and Hydroton
3-part Flora Kit

AEROFLO2 260 Extension
60 Site Aeroponics System

Our largest AeroFlo2 unit, the AeroFlo2 60, accommodates sixty plant sites. Growers who wish to expand this system can enjoy 120 plant sites with the addition of our AeroFlo2 60 Extension Unit. Users can choose to configure the grow chambers all on the same side or to stagger them to cover a larger area or to grow larger plants. The AeroFlo2 60 features a generous 40-gallon Panda reservoir.

The AeroFlo2 60 is sized as follows:
Standard configuration:
5'1" x 6'10"
Staggered configuration:
5'1" x 11'7"
Aero Flo 2 60 with Extension Unit:
9'7" x 6'10"

This system includes:
40-gallon Panda reservoir
Six 6 ft. grow chambers
reservoir coupler
Injection manifold
Support structure
3" Grow Cups
CocoTek Coco Cups and Hydroton
3-part Flora Kit

Download Product Guide Here

EUROGROWER
Drip Hydroponic System

The new EuroGrower from General Hydroponics is the ideal system for someone new to gardening. The EuroGrower provides users with a simple, yet elegant approach to home hydroponics. The heart of the EuroGrower is our custom designed 40-gallon Panda reservoir, which is more than adequate for its eight 2-gallon buckets. Whether using a soil or soil-less medium, growers can use the EuroGrower virtually anywhere. The EuroGrower comes complete with Flora Series nutrients, which are currently the industry standard.
This system is sized 4’7” x 2’

This system includes:
40-gallon Panda reservoir
8 buckets
250gph Mag-Drive 2
Mag-Drive Pump
CocoTek bricks
Hydroton
PH kit
Grasslin timer
3-part Flora Kit

WATERFARM
Drip Hydroponic System

Our best selling hydroponic module, the WaterFarm is built with high-impact plastic to assure a long service life. The WaterFarm unique square design allows growers to closely pack WaterFarm units to create large, high-density installations. The WaterFarm will grow small, medium, and large plants. With its large water capacity and low water requirements, the WaterFarm is simple and efficient. Offering the features of larger systems at a lower cost without sacrificing quality or performance, the WaterFarm is seen as one of our very best buys.

The WaterFarm comes in two forms, complete and modular. The complete WaterFarm is designed to be a stand alone system and includes all the items listed below. The modular unit comes without a Drain Level Tube, Elite air pump, Hydroton, or Flora kit, as it is designed to use with a General Hydroponics controller supplying multiple WaterFarm units.

This system is sized 1’ x 1’

This system includes (sold as complete system only):
4-gallon reservoir
2-gallon growing chamber
Pumping column
Column support tube
Drip ring
1/2" grommet
Drain level tube
Elite? 800 air pump
9L Hydroton
3-part Flora Kit

The WaterFarm 8-pack is eight WaterFarm module units connected to one General Hydroponics Controller: and integrated 13 gallon reservoir and an 8 gallon controller unit. The Controller will keep each unit topped off with the correct level of nutrient for low maintenance. The kit is powered by GH’s Dual Diaphragm Air Pump, and includes all the necessary hardware , supplies and General Hydroponics Flora Series nutrients. The grower can arrange the WaterFarm units in a design that is suitable for any environment. Pack them tight or space them out for your growing situation. The WaterFarm 8-pack is the system for big growers. This system does not include Hydroton.

Download Product Guide Here

Download Controller Product Guide Here

ECOGROWER
Drip Hydroponic System

The EcoGrower incorporates an air driven “spider” drip system and uses the same revolutionary hexagonal reservoir with removable six inch lid inserts. Each lid insert will accommodate one 6” net pot that can easily grow very large plants. In keeping with our commitment to the environment, General Hydroponics will soon release versions of the EcoGrower that will operate with electricity recovered from solar panels. United States and International patents are pending for the EcoGrower and RainForest's unique modular design.

This system is sized 2’ x 2’

This system includes (sold as complete system only):
17-gallon reservoir
Spider drip assembly
Pumping column
Insert lid
Six 6” lid inserts
Net cups
CocoTek liners
Elite 800 air pump
1/4” air line
Hydroton
Flora nutrients

RAINFOREST SERIES Aeroponics Cloning/Growing System For propagating cuttings or quick-starting seeds, rooting transplants or seedlings, no other hydroponic system will match the performance of the RainForest. This system is ideal for starting plants or even growing plants to maturity and on to harvest. Many growers choose to start their plants in RainForest modules and later transplant them into larger systems such as our WaterFarm. Several RainForest modules can be connected to a Texas Controller for creating larger installations.

	RAINFOREST 36 Six 3" Site Aeroponics System The RainForest 36 is our least expensive RainForest system. It is ideal for small projects in limited space. A submerged pump circulates and aerates the nutrient solution. This System’s size is 12” circular This system includes: 4 Gallon Reservoir with Lid Rio? 600 pump assembly 3” Plastic Cups CocoTek Liners and Caps 3-Part Flora Kit

RAINFOREST 66 Six 6" Site Aeroponics System The Rainforest 66 is a favorite among users who wish to grow medium to large size plants. Vortex Sprayer lifts and oxygenates the nutrient solution, and then gently distributes it over cutting’s bases or root systems. This system’s size is 24” hexagonal This system includes: 17-Gallon Reservoir with Lid Six 6" Lid inserts Vortex? Sprayer 6” Plastic Cups CocoTek Liners CocoTek Caps 3-Part Flora Kit

RAINFOREST 318 Eighteen 3" Site Aeroponics System The RainForest 318 can accommodate up to eighteen small plants from cuttings to harvest, or up to ninety cuttings for rooting and transplantation using the 3” CocoTek coconut caps included. Vortex Sprayer lifts and oxygenates nutrient solution then gently sprays it over cutting bases or root systems. This system’s size is 24” hexagonal This system includes: 17-Gallon Reservoir with Lid Six 3" Lid inserts Vortex? Sprayer 3” Plastic Cups CocoTek Liners CocoTek Caps 3-Part Flora Kit

RAINFOREST 236 Thirty-six 2" Site Aeroponics System Growers can use the RainForest 236 to create a modestly sized nursery. Use this model to propagate cuttings or to quick-start seeds in a small footprint area. Vortex Sprayer lifts and oxygenates nutrient solution then gently sprays it over cutting bases or root systems. This system’s size is 24” hexagonal This system includes: 17-Gallon Reservoir with Lid Six 2" Lid inserts Vortex? Sprayer 2” Plastic Cups CocoTek Liners CocoTek Caps 3-Part Flora Kit

Download Rain Forest 36 Product Guide Here

Download Rain Forest 66, 318 & 236 Product Guide Here