LATEST 600W Luma Digital Air Cooled System

Package Content:

• 1 x 6" LUMA Air Cooled Reflector Hood
• 1 x 600W Digital Ballast w/ 120V Power Cord
• 1 x 600W Metal Halide Bulb
• 1 x 600W High Pressure Sodium Bulb
• 1 x Ceramic Socket (pre-wired into reflector)
• 1 x Set of Yoyo Pulleys
• 1 x Free 24 Hour Timer

6" Air Cooled Reflector Hood:

• Allows for regular air cooling
• Includes a pre-wired ceramic socket
• Assemble Lighting
• Multi-surface large hood to reflect most light towards your plants
• Standard 6" air vent fits to 6" exhaust fan system (NOT included) and fits inside most grow tents
• Removable tempered glass locked by switch which helps in regulating temperature control
• Tempered glass assemble with exhaust fan (NOT included) can relieve heat for plants that do not need much heat
• Tempered glass removed without exhaust system can offer more heat for tropical plants
• Includes a 15 Foot cord to the Digital Ballast
• Overall Dimensions: 25in.(L) x 18in.(W) x 8.5in.(H)
• Reflector Opening Dimensions: 19.25in.(L) x 16.5in.(W)

Light Weight 600W Digital Electronic Ballast (covered by 3 Year Manufacturer Warranty):

• This new Digital Technology is the greatest advancement in hydroponics! Operates both High Pressure Sodium (HPS) and Metal Halide (MH) Bulbs.
• Includes built in Cooling Fans.
• Includes a 8 Foot 120V cord to the power outlet (US Standard Plug)
• FCC, CE & CSA Certified
• HIGH OUTPUT! Our illumaLights Digital electronic ballasts are specifically manufactured for the horticultural industry and provide maximum light output!
• LOWER YOUR ELECTRICITY BILL AND SAVE MONEY! More efficient and reduced energy consumption means a lower electricity bill. When compared to standard core and coil magnetic ballasts you can save up to $100 a year on electricity!
• WORKS ON EITHER 120V OR 240V . It automatically detects the voltage and adjusts between 120-240 volts! Plugs into any standard household outlet.
• With a sleek look, the digital ballast is lighter, smaller and more reliable than standard technology "core and coil" ballasts. It is also SUPER QUIET!
• The Built in "smart chip" included with the ballast AUTOMATICALLY ADJUSTS TO HIGH PRESSURE SODIUM AND METAL HALIDE BULBS. There is no need for a "switch" or to change systems, simply change from MH for vegetative growth to HPS for the flowering phase of growth.
• Operates at a high frequency (20,000Hz) instead of the lowly 60Hz of standard core & coil ballasts. This allows the lamp to operate more efficiently, produce more usable light for plants and last longer. Lamp lumen loss is minimized allowing for a brighter system over time and extending usable lamp life by up to three times it's normal life span!
• LOW HEAT! The digital ballasts run a lot cooler than standard systems improving ballast life.

600W High Pressure Sodium Bulb:

• Power: 600 watts (High efficiency)
• Expected Life Span: 24,000 hours
• Lumen: 90,000 lumens
• Color Temperature: 2,000K
• Contains more red spectrum, which is best for flowering.
• Strong power to penetrate fog
• High output, high luminescence efficiency.
• Fit for all standard 600 watts HPS grow light systems
• Higher lumen output for higher yields!

600W Metal Halide Bulb:

• Power: 600W (High efficiency)
• Expected Life Span: 8,000 hours
• Lumen: 57,600 lumens
• Color Temperature: 4,000K
• Contains blue spectrum, which is best for vegetation.
• Strong power to penetrate fog
• High output, high luminescence efficiency.
• Fit for all standard 600 watts MH grow light systems
• Special good efficiency for leafy plants such as Lettuce and Herb
• Higher lumen output for higher yields!

Ceramic Socket:

• Fit for E39 bulb cap
• Detachable durable ceramic socket
• Easy to install if you need to change your reflector
• Ceramic socket should be used with ballast for steady power supply.
• With a 15ft. cord to the ballast

Timer: (Included FREE)

• Safe and easy to use
• UL Approved with Dual Outlets
• Ensure timer is disconnected from power supply.
• Press down the segment pushbuttons according to how long you require the system to stay on.
• Each segment is 15 minutes.
• Turn the timer dial until the black pointer is set to the present time.
• Plug in your grow light system to the timer and then the timer to the power supply socket and switch the socket on.
• Timer and your light system go working until the stop time.
• The timer can be overridden by moving the red switch on the side.
• Timer Power: Max Wattage 1725W; Max Current 15A/125V/60Hz

Yoyo Pulleys: (Included FREE)

• Ease in adjusting the height setting for the reflector
• Max load weight of 5Kg per pulley
• Attach the ceiling hooks.
• Attach one end of the roller to one of the hooks and make sure that the screw on the roller is loosened allowing the roller to be able to release.
• Pull the roller down and securely attach this to one side of the reflector.
• Repeat this for the other roller as well.
• Once both rollers have been attached to the reflector adjust the reflector to the right height.
• Tighten the screw to prevent the roller from releasing any more distance.

Customer Reviews:

You may also be interested in this/these product(s)

600W Digital Air Cool Tube System Regular Price: $350.00 Sale Price: $260.00 You Save: $90.00

600W Digital Open Reflector System Regular Price: $320.00 Sale Price: $230.00 You Save: $90.00

600W Electronic Digital Ballast (UL) Regular Price: $220.00 Sale Price: $170.00 You Save: $50.00